Why air is dangerous in space – if it’s in the wrong place

Earth from outer space night to day transition
Visit us! Booth Number: 8020

MAY 23 – 25, 2022 // LONG BEACH, CALIFORNIA, USA

Press information Why air is dangerous in space – if it’s in the wrong place Of course, people in space need air to breathe – but in adhesives, sealants or coatings for electronic components, air can be deadly. Air does not stick or seal. Even on earth, air bubbles in such materials can be annoying. In space, however, the crew must be able to rely on every device, every material more than 150 per cent. When no replacement device is available or repairs are impossible, air can therefore even be deadly. Hamm/Detroit, March 25th, 2022. Materials for the aerospace industry are highly specialised to provide the ultimate performance in each specific application. The processes by which these materials are prepared and applied are often as critical as the materials themselves. NASA has trusted the Hauschild SpeedMixer® for their mixing processes since 2009 because of the quality and repeatability that can be achieved with DAC mixing. Fabio Boccola, CEO of Hauschild Engineering, says: “When NASA buys a Hauschild SpeedMixer® to mix materials for use in space, it’s special for us, too. We are proud that the US space agency NASA has just purchased another Hauschild SpeedMixer®, confirming that it is indeed the cutting edge of mixing technology.” Professional grade mixing devices such as the Hauschild SpeedMixer® rely on the principle of the “DAC”, i.e. Dual Asymmetric Centrifuge. Here, the combination of opposing centrifugal forces enables an extremely fast, efficient mixing process that is characterized by a homogeneous, bubble-free result, prepared in a disposable mixing vessel. This means there is no clean-up required. The possible applications of this centrifugal mixer are as diverse and multifaceted as the product world itself: Different liquids and pastes, pastes with powders, powders with powders and other combinations of liquids and powders can be mixed. Materials with different chemical and physical properties can also be mixed to form new sealants and adhesives. Bubble-free thanks to special mixing technique During the mixing process, the rotation of the mixing cup in two different directions and the combination of centrifugal forces naturally removes voids and micro-bubbles, even in cartridges. In most cases, there is no need for an additional degassing cycle as there is when using conventional mixing techniques or processing tools. For special cases when vacuum mixing is absolutely necessary (such as heat cured or space grade materials), the Hauschild SpeedMixer® is available with vacuum mixing technology. Programmable cycles ensure identical, reproducible mixing of each and every batch. This saves time, eliminates process variability, and maximizes pot life. No cleaning required The Hauschild SpeedMixer® mixes without blades by spinning closed disposable cups. This means that cleaning and the use of cleaning chemicals can be entirely eliminated. The capacity of the mixing cups and mixing buckets ranges from a few grams to ten kilograms, and from a few millilitres to 16 litres nominal capacity – depending on how large the batch is to be.

Visit us at Space Tech Expo, May 23 – 25, 2022 // Long Beach, California, USA, booth 8020

More info: www.hauschild-speedmixer.com Youtube: https://www.youtube.com/channel/UCs9jdLhro1rPgRZ3Lr-Nu1A/videos Photo (Hauschild Engineering): New generation of centrifugal mixers makes new materials for 3-D printing possible About Hauschild Engineering: The family-owned company Hauschild Engineering employs around 40 people and has been developing and producing the Hauschild SpeedMixer® at its headquarters in Hamm/Germany since 1974, selling it directly or with partners all over the world. The original Hauschild SpeedMixer® offers perfect mixing results from a few grams or milliliters up to ten kilograms or sixteen liters. The machines are mostly used in laboratories that mix substances as part of their research and development work, as well as by companies that require small batch mixes for quality assurance. Within few minutes, different liquids can be mixed with pastes or powders, pastes with powders, powders with powders, and substances with different chemical and physical properties – all without the use of stirring tools. The Hauschild SpeedMixer®, including all components, are manufactured according to a highest quality standards – made in Germany. US distributor contact details of Hauschild Engineering: Hauschild SpeedMixer Inc. 37735 Enterprise Ct, Suite 300 Farmington Hills, MI 48331 USA Mr. Davide Davi (CEO Americas) Phone: +1 (877) SPDMXER Fax: +1 (469)581-9981 Web: www.hauschild-speedmixer.com eMail: info.us@hauschild-speedmixer.com Press Contact Mareike Boccola Hauschild GmbH & Co KG (Hauschild Engineering) Waterkamp 1, 59075 Hamm, Germany Phone: +49 2381 482050 Fax: +49 2381 4820517 Web: www.hauschild-speedmixer.com eMail: pressoffice@hauschild-speedmixer.com